MCP19123T-E/MQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2018 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | 3V TO 5V REGULATING OUTPUT ALSO AVAILABLE |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Frequency | 1.6MHz |
| Base Part Number | MCP19123 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 16V |
| Output Type | PWM Signal |
| Input Voltage-Nom | 40V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~40V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Watchdog |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~1.6MHz |
| Input Voltage (Max) | 48V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Serial Interfaces | I2C, PMBus, SMBus |
| Output Phases | 2 |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
MCP19123T-E/MQ Overview
It comes in a 28-VFQFN Exposed Pad package, so switching controller can be used for most applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). A total of PWM Signal dc switching's outputs can be handled by it. Voltages 4.5V~40V are the dc control's supply voltage and operating voltage, respectively. Worked in a -40°C~125°C TA dc switcher before. With this switching controller, you can switch at 100kHz~1.6MHz. The Surface Mount makes it ideal for general dc dc regulator. The dcdc regulator features Enable, Frequency Control, Power Good, Soft Start, Watchdog for efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a QUAD terminal on the switching converters. Various 28 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 40V. Searching "MCP19123" will return other relevant dc to dc converter ics. dc dc voltage regulators should have a minimum input voltage of 4.5V. Statistically, the DC regulator outputs 16V voltage. It should be fully noted that the dc to dc regulator only accepts 48V input voltage at most. You should note down the dc dc regulator's usual output current of 4A when you start a project. There is 1.6MHz frequency setting on the switching controller. In order to satisfy the need, DC to DC voltage regulator has a value of 3V TO 5V REGULATING OUTPUT ALSO AVAILABLE. There are several dc to dc voltage regulator in the Automotive, AEC-Q100 series.
MCP19123T-E/MQ Features
PWM Signal Outputs
Switching Frequency: 100kHz~1.6MHz
Enable, Frequency Control, Power Good, Soft Start, Watchdog
PULSE WIDTH MODULATION
Frequency: 1.6MHz
3V TO 5V REGULATING OUTPUT ALSO AVAILABLE
MCP19123T-E/MQ Applications
There are a lot of Microchip Technology MCP19123T-E/MQ DC to DC converter applications.
- Die casting equipment
- Wind power
- Sink circuits
- Nuclear power plants
- Imported equipment
- Digital display device
- Radio equipment
- Analog precision reference circuits
- Industrial robots
- Laboratories
