MCP19124-E/MJ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2016 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Base Part Number | MCP19124 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | PWM Signal |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.5V |
| Control Features | Dead Time Control, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, Cuk, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 31.25kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Serial Interfaces | I2C, PMBus, SMBus |
| Output Phases | 2 |
| Height Seated (Max) | 0.9mm |
| Length | 4mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MCP19124-E/MJ Overview
With its 24-VFQFN Exposed Pad package, the switching controller fits the needs of most applications. 1 outputs can be generated with the dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. With PWM Signal dc switching's output (s), it is able to handle it. dc controls with 4.75V~5.5V voltage are supplied and operated. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 31.25kHz~2MHz position. dc dc regulators can be carried out with Surface Mount. Switching control is made easier with the dcdc regulator's Dead Time Control, Frequency Control, Ramp, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a terminal (s) on the switching converters that are designed at QUAD. A variety of terminations with 24 of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. In addition to "MCP19124", there are other relevant dc to dc converter ics you can find. Total pins of switching converter are 24. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. Switching controllers operate at 2MHz frequencies. Basically, it's a dc to dc voltage regulator from the Automotive, AEC-Q100 series.
MCP19124-E/MJ Features
PWM Signal Outputs
Switching Frequency: 31.25kHz~2MHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Frequency: 2MHz
MCP19124-E/MJ Applications
There are a lot of Microchip Technology MCP19124-E/MJ DC to DC converter applications.
- Flexible manufacturing cells
- seismic instrument power circuits
- Wide-range voltage regulation circuits
- Power supplies of electronic gadgets
- Sink circuits
- Network technology
- Computer rooms
- Communication system
- Household control circuits
- Electrical power transmission
