MCP19124T-E/MJ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Base Part Number | MCP19124 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | PWM Signal |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25mA |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.5V |
| Control Features | Dead Time Control, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, Cuk, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 31.25kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Serial Interfaces | I2C |
| Output Phases | 2 |
| Height Seated (Max) | 0.9mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
MCP19124T-E/MJ Overview
In the 24-VFQFN Exposed Pad package, the switching controller meets most application requirements. For outputs of 1, this dc motor controller is suitable. The pmic is packaged in Tape & Reel (TR) solid enclosure. With this function, you can deal with PWM Signal dc switching's outputs (s). 4.75V~5.5V is the supply voltage and the operating voltage of the dc control. Suitable for a -40°C~125°C TJ dc switcher. Switching can be done at 31.25kHz~2MHz with this switching controller. The Surface Mount allows it to be used for dc dc regulator in general. To provide efficient switching control, Dead Time Control, Frequency Control, Ramp, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at QUAD . 24 terminations with various dc switching's functions. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. You can find other relevant dc to dc converter ics by searching "MCP19124". It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. In most cases, the dc dc regulator's output current is 25mA. This information should be noted when you begin working with the component. Switching controllers work at 2MHz Hz. Automotive, AEC-Q100 series dc to dc voltage regulator belong to this series.
MCP19124T-E/MJ Features
PWM Signal Outputs
Switching Frequency: 31.25kHz~2MHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Frequency: 2MHz
MCP19124T-E/MJ Applications
There are a lot of Microchip Technology MCP19124T-E/MJ DC to DC converter applications.
- Game consoles
- Smart grid
- Bending machines
- Mobile phones
- Correction machines
- Plate bending machines
- Drilling machines
- Geothermal power
- Fire elevators
- Injection molding machinery
