MCP19214-E/MQ
| Parameters | |
|---|---|
| Published | 2016 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Base Part Number | MCP19214 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | PWM Signal |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Control Features | Dead Time Control, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, Cuk, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.035A |
| Frequency - Switching | 31.25kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 10mA |
| Synchronous Rectifier | Yes |
| Screening Level | AEC-Q100; TS-16949 |
| Serial Interfaces | I2C |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
MCP19214-E/MQ Overview
With its 28-VFQFN Exposed Pad package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. Tube is the solid enclosure in which PMIC is packaged. The program can handle PWM Signal dc switching's outputs (s). The supply and operating voltage of the dc control are 4.5V~42V. Worked in an dc switcher with a -40°C~125°C TJ rating. There is a switch at 31.25kHz~2MHz that can be used with this controller. A generalization of dc dc regulator can be made using Surface Mount. Featured in the dcdc regulator is Dead Time Control, Frequency Control, Ramp, Soft Start which allows efficient switching control. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a QUAD terminal on the switching converters. Different dc switching's functions can be applied to 28 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. You can find other relevant dc to dc converter ics by searching "MCP19214". It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. Switching controllers work at 2MHz Hz. Switching converter outputs current to the greatest value of 0.035A. It belongs to the dc to dc voltage regulator series Automotive, AEC-Q100. Switching controller is necessary to provide a voltage of 5V. The controller should not be supplied with more current than 10mA.
MCP19214-E/MQ Features
PWM Signal Outputs
Switching Frequency: 31.25kHz~2MHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Frequency: 2MHz
MCP19214-E/MQ Applications
There are a lot of Microchip Technology MCP19214-E/MQ DC to DC converter applications.
- Refrigerators of central air conditioners
- Computer rooms
- Drilling machines
- Analog precision reference circuits
- Digital precision reference circuits
- Grinders
- Various precision measuring detectors
- Packaging
- Network technology
- Industrial controllers
