MCP19215-E/S8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2016 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Base Part Number | MCP19215 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | PWM Signal |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Control Features | Dead Time Control, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, Cuk, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.035A |
| Frequency - Switching | 31.25kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 10mA |
| Synchronous Rectifier | Yes |
| Screening Level | AEC-Q100; TS-16949 |
| Serial Interfaces | I2C |
| Height Seated (Max) | 0.9mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
MCP19215-E/S8 Overview
This switching controller fits most application requirements since it is packaged in a 32-VFQFN Exposed Pad package. 2 outputs can be generated with the dc motor controller. Packaging for the pmic consists of Tube solid enclosures. With this function, you can deal with PWM Signal dc switching's outputs (s). The supply and operating voltage of the dc control are 4.5V~42V. Suitable for a -40°C~125°C TJ dc switcher. This switching controller can switch at 31.25kHz~2MHz. A generalization of dc dc regulator can be made using Surface Mount. Dead Time Control, Frequency Control, Ramp, Soft Start provides dcdc regulator efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. Terminal (s) of the switching converters are designed at the QUAD position. 32 terminations with various dc switching's functions. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. You can find other relevant dc to dc converter ics by searching "MCP19215". It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. A frequency of 2MHz is used by the switching controller. 0.035A is the greatest value switching converter outputs as current. Automotive, AEC-Q100 series dc to dc voltage regulator belong to this series. The supply voltage must be 5V. In order to ensure proper operation, the controller should not receive more current than 10mA.
MCP19215-E/S8 Features
PWM Signal Outputs
Switching Frequency: 31.25kHz~2MHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Frequency: 2MHz
MCP19215-E/S8 Applications
There are a lot of Microchip Technology MCP19215-E/S8 DC to DC converter applications.
- Pipe bending machines
- Correction machines
- Injection molding machinery
- Fire elevators
- Current source circuits
- Flaw detection equipment
- Solar power plants
- Scientific research
- SMT equipment
- Telecommunications equipment
