MCP19215T-E/S8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MCP19215 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | PWM Signal |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Control Features | Dead Time Control, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, Cuk, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.035A |
| Frequency - Switching | 31.25kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 10mA |
| Synchronous Rectifier | Yes |
| Screening Level | AEC-Q100; TS-16949 |
| Serial Interfaces | I2C |
| Height Seated (Max) | 0.9mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
MCP19215T-E/S8 Overview
Capsuled in the 32-VFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. It is sufficient to generate 2 outputs with this dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. There are PWM Signal dc switching's output (s) that it can handle. Voltages 4.5V~42V are the dc control's supply voltage and operating voltage, respectively. Suitable for working in an dc switcher that has a -40°C~125°C TJ. Switching can be done at 31.25kHz~2MHz with this switching controller. dc dc regulators can be carried out with Surface Mount. DCDC regulator is controlled efficiently by Dead Time Control, Frequency Control, Ramp, Soft Start. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. switching converters terminal (s) are designed to be at QUAD. Different dc switching's functions can be applied to 32 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. It is inputted with a DC switcher's voltage of 12V. MCP19215 can be searched for other relevant dc to dc converter ics. Input voltage of dc dc voltage regulator should be 4.5V. The output value is set to the greatest value of 0.035A. It belongs to the dc to dc voltage regulator series Automotive, AEC-Q100. A supply voltage of 5V is required. Current supplied to the controller should not exceed 10mA.
MCP19215T-E/S8 Features
PWM Signal Outputs
Switching Frequency: 31.25kHz~2MHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
MCP19215T-E/S8 Applications
There are a lot of Microchip Technology MCP19215T-E/S8 DC to DC converter applications.
- Computed tomography (CT)
- Nuclear power plants
- Pipe bending machines
- Ball screw pair
- Energy management systems
- Laboratories
- Window air conditioners
- Shearing machines
- Wind power
- Remotely powered electric motors
