MCP2003-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | THERMAL SHUTDOWN |
| Voltage - Supply | 6V~27V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | MCP2003 |
| Pin Count | 8 |
| Output Voltage | 27V |
| Interface | LIN |
| Operating Supply Current | 90μA |
| Nominal Supply Current | 1mA |
| Output Current | 200mA |
| Max Supply Current | 1mA |
| Differential Output | NO |
| Protocol | LINbus |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 175mV |
| Number of Drivers | 1 |
| Number of Transceivers | 2 |
| Receive Delay-Max | 6000 ns |
| Transmit Delay-Max | 4000 ns |
| Baud Rate | 20 kbaud |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP2003-E/P Overview
Designed for common LEDs, this driver IC features an enhanced 8-DIP (0.300, 7.62mm) package.The Tube package contains this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.PCB or development board with Through Hole-type connectors can accommodate this wide receiver.It takes 6V~27V from the power supply to run this differential driver.As many as 1/1 receivers/drivers are eligible for use on this electronic part.The operating temperature of this ic receiver is -40°C~125°C. It is primarily designed for applications with low temperatures.With a voltage range of 12V, this driver IC can operate efficiently.In this wide receiver, 8 terminations are integrated for driving and receiving signals from data.In this package, you will find 8 market-standard pinouts for this transceiver.This part number MCP2003 can be used to search for more variants based on the product type, temperature, package, etc.8-pin driver chip with enhanced power dissipation.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Through Hole mounting technologies.There is usually a 1-bit resolution specified for this receiver when it is used.There are 2 transceivers in total that this module isolated transceiver implements.1 drivers are embedded on the integrator circuit.In addition, the optical transceiver module's THERMAL SHUTDOWN function improves signal management accuracy and stability overall.It has the ability to drive LEDs with an input voltage of up to about 90μA with the help of this integrating circuit.It is possible for this can transceiver to have mal-functions when its input current reaches or exceeds 1mA.27V is the voltage Wide receiver can deliver.The output current of this bluetooth transceiver is 200mA.
MCP2003-E/P Features
Tube package
8 pin count
8 pins
MCP2003-E/P Applications
There are a lot of Microchip Technology MCP2003-E/P Drivers/Receivers/Transceivers applications.
- Fiber distributed data interface (FDDI)
- Sensor reporting
- interconnection between switches
- Routers
- Switches
- Fiber-to-the-desktop
- Metro access rings
- Wireless modems
- Fiber optic cable connection network
- Car alarm systems
