MCP2003-E/SN
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | THERMAL SHUTDOWN |
| Voltage - Supply | 6V~27V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP2003 |
| Pin Count | 8 |
| Output Voltage | 27V |
| Interface | LIN |
| Operating Supply Current | 90μA |
| Nominal Supply Current | 1mA |
| Output Current | 200mA |
| Max Supply Current | 1mA |
| Differential Output | NO |
| Protocol | LINbus |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 175mV |
| Number of Drivers | 1 |
| Number of Transceivers | 2 |
| Receive Delay-Max | 6000 ns |
| Transmit Delay-Max | 4000 ns |
| Baud Rate | 20 kbaud |
| Height | 1.5mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
MCP2003-E/SN Overview
LED drivers benefit from this IC's enhanced 8-SOIC (0.154, 3.90mm Width) package.Tube package is used to mount this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.A Surface Mount-type PCB or development board can be used to place this wide receiver.In terms of power supply, this differential driver utilizes 6V~27V.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.The operating temperature of this ic receiver is -40°C~125°C. It is primarily designed for applications with low temperatures.An output voltage range of 12V is sufficient to run this line driver ic efficiently.This integrated circuit has 8 terminations designed for driving and receiving signals from data.It is packaged with 8 pinouts that are market standard for this particular transceiver.This part number MCP2003 can be used to search for more variants based on the product type, temperature, package, etc.An enhanced power dissipation control driver IC featuring 8 pins.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.In the case of this receiver, a resolution of 1 bits is typically specified.The module isolated transceiver implements a total of 2 transceivers.1 drivers are embedded on the integrator circuit.ICs with THERMAL SHUTDOWN functions also improve the overall stability and accuracy of signal management.With this integrating circuit you can drive LEDs of a voltage of up to 90μA. It can be used to drive large displays.A malfunction could occur when the input current exceeds 1mA.At 27V, Wide receiver is able to deliver voltage to the load.With this bluetooth transceiver, you are able to obtain a current of 200mA at the output.
MCP2003-E/SN Features
Tube package
8 pin count
8 pins
MCP2003-E/SN Applications
There are a lot of Microchip Technology MCP2003-E/SN Drivers/Receivers/Transceivers applications.
- Home theater wiring-free
- interconnection between switches
- Wireless modems
- Changeing the frequency from IF to RF
- SONET/SDH Network
- Remote controls
- Wireless security systems
- Long-distance fiber optic network applications
- Car radio
- WDM transmission
