MCP2551-I/SN
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP2551 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | CAN |
| Nominal Supply Current | 75mA |
| Max Supply Current | 75mA |
| Slew Rate | 8.5 V/μs |
| Data Rate | 1 Mbps |
| Protocol | CANbus |
| Number of Drivers/Receivers | 1/1 |
| Duplex | Half |
| Receiver Hysteresis | 200mV |
| Number of Transceivers | 1 |
| Number of Receive Buffers | 1 |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Network Interfaces |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
MCP2551-I/SN Overview
Driver ICs with enhanced 8-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.In the Tube package, this receiver is mounted.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.Any Surface Mount-type PCB or development board can be used with this wide receiver.In terms of power supply, this differential driver utilizes 4.5V~5.5V.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.Driver ICs with a supply voltage range of 5V can operate efficiently.In this wide receiver, 8 terminations are integrated for driving and receiving signals from data.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.Since the base part number MCP2551 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.An enhanced power dissipation control driver IC featuring 8 pins.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.A subcategory named Network Interfaces can be used to group this rf transceiver module.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.In total, there are 1 transceivers implemented by this module isolated transceiver.can transceivers with an input current greater than 75mA may have malfunctions.
MCP2551-I/SN Features
Tube package
8 pin count
8 pins
5V power supply
MCP2551-I/SN Applications
There are a lot of Microchip Technology MCP2551-I/SN Drivers/Receivers/Transceivers applications.
- Wireless access points
- Cable network front end
- Shortwave receiver
- Wireless showroom
- Vehicle
- Mainframes, workstations or storage devices
- Ship
- Precision geodetic measurement
- Switching system
- Satellite radio receiver
