MCP3008-I/SL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP3008 |
| Pin Count | 16 |
| Output Voltage | 4.1V |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Power Supplies | 3/5V |
| Configuration | MUX-S/H-ADC |
| Number of Channels | 8 |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 425μA |
| Number of Bits | 10 |
| Input Type | Pseudo-Differential, Single Ended |
| Architecture | SAR |
| Number of Inputs | 4, 8 |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Reference Type | External |
| Data Interface | SPI |
| Resolution | 1.25 B |
| Sampling Rate | 200 ksps |
| Voltage - Supply, Analog | 2.7V~5.5V |
| Voltage - Supply, Digital | 2.7V~5.5V |
| Number of Analog In Channels | 8 |
| Sampling Rate (Per Second) | 200k |
| Output Bit Code | BINARY |
| Linearity Error-Max (EL) | 0.0977% |
| Integral Nonlinearity (INL) | 1 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Conversion Rate | 200 ksps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 5V |
| Signal to Noise Ratio (SNR) | 200 dB |
| Differential Nonlinearity | 1 LSB |
| Height | 1.2446mm |
| Length | 9.8806mm |
| Width | 3.9116mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP3008-I/SL Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 16-SOIC (0.154, 3.90mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 16 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 8 channels.The is equipped with 16 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 200k Hz.The input type of this electronic AD converter is Pseudo-Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 16 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MCP3008 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.Surface Mount can be used to mount the analogue to digital converter.The ADC converter operates with the maximal supply voltage of 5.5V.4, 8 inputs are employed.It operates with the minimal supply voltage of 2.7V.The maximal analog input voltage of this electrical AD converter is 5V.The ADC converter operates from 3/5V power supplies.The number of channels is growing strong/weak: 8.The conversion rate of this electrical AD converter is calculated as 200 ksps.The ADC converter consists of 1 elements.The output voltage is maintain at 4.1V.
MCP3008-I/SL Features
1 Functions
16 basic kinds of terminations
16 pin count
Minimal supply voltage of 2.7V
3/5V power supplies
1 elements
MCP3008-I/SL Applications
There are a lot of Microchip Technology MCP3008-I/SL ADC applications.
- Imaging Systems
- In-building wireless telephony
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Automotive
- TD-SCDMA, WiMAX
- Communication Systems
- Music reproduction technology
- 4-channel data acquisition
- Wireless local loop
- Displaying
