MCP3201-CI/ST
| Parameters | |
|---|---|
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP3201 |
| Pin Count | 8 |
| Polarity | Unipolar |
| Power Supplies | 5V |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 300μA |
| Number of Bits | 12 |
| Input Type | Pseudo-Differential |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Reference Type | External |
| Data Interface | SPI |
| Resolution | 1.5 B |
| Sampling Rate | 100 ksps |
| Voltage - Supply, Analog | 2.7V~5.5V |
| Voltage - Supply, Digital | 2.7V~5.5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 100k |
| Output Bit Code | BINARY |
| Integral Nonlinearity (INL) | 2 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Conversion Rate | 100 ksps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 5.6V |
| Signal to Noise Ratio (SNR) | 72 dB |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
MCP3201-CI/ST Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 8-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 8 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 100k Hz.The input type of this electronic AD converter is Pseudo-Differential.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MCP3201 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.The ADC converter is possible to mount the device with the help of Surface Mount.The ADC converter operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 2.7V.The maximal analog input voltage of this electrical AD converter is 5.6V.The ADC converter operates from 5V power supplies.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 100 ksps.
MCP3201-CI/ST Features
1 Functions
8 basic kinds of terminations
8 pin count
Minimal supply voltage of 2.7V
5V power supplies
MCP3201-CI/ST Applications
There are a lot of Microchip Technology MCP3201-CI/ST ADC applications.
- Multicarrier, multimode digital receivers
- Uninterrupted Power Supplies
- TD-SCDMA, WiMAX
- Communication Systems
- High Speed Data Acquisition
- Medical Instrumentation and medical imaging
- Scientific instruments.
- High Speed Data Acquisition for PCs
- Music recording
- Micro and pico cell systems, software radios
