MCP3301-BI/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Terminal Position | DUAL |
| Base Part Number | MCP3301 |
| Pin Count | 8 |
| Output Voltage | 4.1V |
| Polarity | Bipolar |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 300μA |
| Number of Bits | 13 |
| Input Type | Differential |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Reference Type | External |
| Data Interface | SPI |
| Resolution | 1.625 B |
| Sampling Rate | 100 ksps |
| Voltage - Supply, Analog | 5V |
| Sampling Rate (Per Second) | 100k |
| Output Bit Code | OFFSET BINARY |
| Integral Nonlinearity (INL) | 1 LSB |
| Conversion Rate | 100 ksps |
| Ratio - S/H:ADC | 1:1 |
| Signal to Noise Ratio (SNR) | 80.02 dB |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP3301-BI/P Overview
The analogue to digital converter is designed with 13 Bits.The AD converter is embedded in the 8-DIP (0.300, 7.62mm) package.The ADC converter is packaged in the way of Tube.There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The is equipped with 8 pin count.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Through Hole.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 100k Hz.The input type of this electronic AD converter is Differential.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The architecture that analogue to digital converter's core adopts is SAR.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.625 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to MCP3301 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Through Hole can be used to mount the analogue to digital converter.The ADC converter operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 2.7V.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 100 ksps.The output voltage is maintain at 4.1V.
MCP3301-BI/P Features
8 basic kinds of terminations
8 pin count
Minimal supply voltage of 2.7V
MCP3301-BI/P Applications
There are a lot of Microchip Technology MCP3301-BI/P ADC applications.
- In-building wireless telephony
- Rotary encoder
- Microcontrollers.
- Music reproduction technology
- Industrial Process Control
- Cell Phones
- Communications
- 3-phase power control
- Digital Storage Oscilloscope
- Imaging Systems
