MCP3424-E/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Feature | PGA, Selectable Address |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP3424 |
| Pin Count | 14 |
| Number of Elements | 1 |
| Polarity | Bipolar |
| Power Supplies | 3/5V |
| Configuration | MUX-PGA-ADC |
| Number of Channels | 4 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 145μA |
| Number of Bits | 18 |
| Input Type | Differential |
| Architecture | Sigma-Delta |
| Converter Type | ADC, DELTA-SIGMA |
| Reference Type | Internal |
| Data Interface | I2C |
| Resolution | 2.25 B |
| Sampling Rate | 3.75 sps |
| Voltage - Supply, Analog | 2.7V~5.5V |
| Voltage - Supply, Digital | 2.7V~5.5V |
| Number of Analog In Channels | 2 |
| Sampling Rate (Per Second) | 3.75 |
| Output Bit Code | 2'S COMPLEMENT BINARY |
| Linearity Error-Max (EL) | 0.0035% |
| Number of A/D Converters | 1 |
| Conversion Rate | 3.75 sps |
| Height | 1.0414mm |
| Length | 5.08mm |
| Width | 4.4958mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP3424-E/ST Overview
The analogue to digital converter is designed with 18 Bits.The AD converter is embedded in the 14-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 14 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 2 channels.The is equipped with 14 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 3.75 Hz.The input type of this electronic AD converter is Differential.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-PGA-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 14 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MCP3424 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.ADC converters can be mounted using Surface Mount.The ADC converter operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 2.7V.The ADC converter operates from 3/5V power supplies.The number of channels is growing strong/weak: 4.The conversion rate of this electrical AD converter is calculated as 3.75 sps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. PGA, Selectable Address can be ensured when operating.The ADC converter consists of 1 elements.
MCP3424-E/ST Features
1 Functions
14 basic kinds of terminations
14 pin count
Minimal supply voltage of 2.7V
3/5V power supplies
1 elements
MCP3424-E/ST Applications
There are a lot of Microchip Technology MCP3424-E/ST ADC applications.
- Uninterrupted Power Supplies
- 4-channel data acquisition
- CMOS Image sensors for mobile applications
- Digital beam-forming systems for ultrasound
- Multicarrier, multimode digital receivers
- Instrumentation and test equipment
- Medical Imaging
- High Speed Data Acquisition
- Communication Systems
- Broadband data applications
