MCP3425A0T-E/CH
| Parameters | |
|---|---|
| Power Supplies | 5V |
| Configuration | PGA-ADC |
| Number of Channels | 1 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 155μA |
| Number of Bits | 16 |
| Input Type | Differential |
| Architecture | Sigma-Delta |
| Converter Type | ADC, DELTA-SIGMA |
| Supply Type | Single |
| Reference Type | Internal |
| Data Interface | I2C |
| Resolution | 2 B |
| Sampling Rate | 15 sps |
| Voltage - Supply, Analog | 2.7V~5.5V |
| Voltage - Supply, Digital | 2.7V~5.5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 15 |
| Output Bit Code | 2'S COMPLEMENT BINARY |
| Conversion Rate | 15 sps |
| Analog Input Voltage-Max | 2.048V |
| Analog Input Voltage-Min | -2.048V |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Feature | PGA |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP3425 |
| Pin Count | 6 |
| Operating Supply Voltage | 5V |
| Polarity | Bipolar |
MCP3425A0T-E/CH Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the SOT-23-6 package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 6 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 6 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 15 Hz.The input type of this electronic AD converter is Differential.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that PGA-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 6 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MCP3425 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.A supply type can be classified by a Single number.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.Surface Mount can be used to mount the analogue to digital converter.The ADC converter operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 2.7V.This electrical digital converter operates from a supply voltage of 5V.The maximal analog input voltage of this electrical AD converter is 2.048V.The ADC converter operates from 5V power supplies.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 15 sps.The minimal analog input voltage of this electrical AD converter is -2.048V.PGA can be ensured when operating.
MCP3425A0T-E/CH Features
1 Functions
6 basic kinds of terminations
6 pin count
Minimal supply voltage of 2.7V
5V power supplies
MCP3425A0T-E/CH Applications
There are a lot of Microchip Technology MCP3425A0T-E/CH ADC applications.
- Micro and pico cell systems, software radios
- High Speed Data Acquisition
- Scientific instruments
- Battery Operated Systems
- High Speed Data Acquisition for PCs
- Music reproduction technology
- Handheld Terminal Interface
- Communication Systems
- Imaging Systems
- Telecommunications
