MCP37221-200I/TL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 124-VFTLA Dual Rows, Exposed Pad |
| Number of Pins | 124 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2015 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 124 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP37221 |
| Operating Supply Voltage | 1.8V |
| Polarity | Bipolar |
| Configuration | MUX-ADC |
| Interface | LVDS, Parallel, Serial |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Number of Bits | 14 |
| Input Type | Differential |
| Architecture | Pipelined |
| Number of Inputs | 1, 2, 4, 8 |
| Converter Type | ADC, FLASH METHOD |
| Reference Type | Internal |
| Data Interface | LVDS - Parallel, Parallel |
| Resolution | 1.75 B |
| Sampling Rate | 200 Msps |
| Voltage - Supply, Analog | 1.14V~1.26V 1.71V~1.89V |
| Voltage - Supply, Digital | 1.14V~1.26V 1.71V~1.89V |
| Number of Analog In Channels | 8 |
| Sampling Rate (Per Second) | 200M |
| Output Bit Code | OFFSET BINARY, 2'S COMPLEMENT BINARY |
| Integral Nonlinearity (INL) | 0.5 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Number of A/D Converters | 1 |
| Output Format | SERIAL, PARALLEL, WORD |
| Conversion Time-Max | 0.005μs |
| Number of Analog Inputs | 8 |
| Height | 850μm |
| Length | 9mm |
| Width | 9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP37221-200I/TL Overview
The analogue to digital converter is designed with 14 Bits.The AD converter is embedded in the 124-VFTLA Dual Rows, Exposed Pad package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 124 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 1.2V.The A/D converter has 8 channels.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, FLASH METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 200M Hz.The input type of this electronic AD converter is Differential.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 124 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 1.14V~1.26V 1.71V~1.89V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.75 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to MCP37221 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply/digital voltage of this electrical AD converter is 1.14V~1.26V 1.71V~1.89V.Surface Mount can be used to mount the analogue to digital converter.The ADC converter operates with the maximal supply voltage of 1.89V.1, 2, 4, 8 inputs are employed.It operates with the minimal supply voltage of 1.71V.The output formats of this electrical AD converter are SERIAL, PARALLEL, WORD , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 1.8V.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. There are 8 analog transmissions, which are both based on how they adapt data to combine an input signal with a carrier signal.
MCP37221-200I/TL Features
1 Functions
124 basic kinds of terminations
Minimal supply voltage of 1.71V
MCP37221-200I/TL Applications
There are a lot of Microchip Technology MCP37221-200I/TL ADC applications.
- Digital Storage Oscilloscope
- Medical Imaging
- Displaying
- Transducer
- Rotary encoder
- Communication test equipment
- Cell Phones
- Automotive
- AC motor control
- Data Acquisition Systems
