MCP3903T-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Other Converters |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP3903 |
| Pin Count | 28 |
| Power Supplies | 3/3.35V |
| Temperature Grade | INDUSTRIAL |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Number of Bits | 24 |
| Converter Type | ADC, DELTA-SIGMA |
| Resolution | 3 B |
| Sampling Rate | 64 ksps |
| Voltage - Supply, Analog | 5V |
| Voltage - Supply, Digital | 2.7V~3.6V |
| Number of Analog In Channels | 6 |
| Output Bit Code | 2'S COMPLEMENT BINARY |
| Number of Converters | 6 |
| Conversion Rate | 64 ksps |
| Analog Input Voltage-Max | 1V |
| Signal to Noise Ratio (SNR) | 91.5 dB |
| Analog Input Voltage-Min | -1V |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP3903T-I/SS Overview
It is packaged in a way that resembles 28-SSOP (0.209, 5.30mm Width).An electronic part designed with 24 Bits is used in this product.It is embedded in the Tape & Reel (TR) package.In the 28 termination, an impedance-matching device is used for terminating a transmission line. This is referred to as the 28 termination.An electrical device like this provides regulated DC power for driving a load by converting alternatives voltage (AC voltage) to regulated direct voltage (DC voltage).This electrical device is supplied with 2.7V~3.6V as the digital voltage or supply voltage.Using the base part number of a component, its related parts can be found based on that number.The supply voltage should be kept as 5V.28 pins are used to design it.Ensure its reliability by operating at -40°C°C minimum operating temperature.In order to ensure the reliability of the system, it operates at the maximum operating temperature of 85°C.28 pins are included.It supports the maximal supply voltage of 5.5V.During its operation, it is supplied with a maximum voltage of 2.7V.Mounted in the direction of Surface Mount, it is positioned in the middle.In Other Converters, you will find this part.The 6 converters will be able to convert both numbers and figures into words and vice versa.In order to operate, it requires a 3/3.35V power supply.A/D converters have a number of channels called 6 channels in them.It is possible to use ADC, DELTA-SIGMA converters based on the input voltage of the source and the output voltage of the converter.
MCP3903T-I/SS Features
MCP3903T-I/SS Applications
There are a lot of Microchip Technology MCP3903T-I/SS AFE applications.
- Broadband data applications
- Multiplexed Data Acquisition Systems
- Scientific instruments
- Communications
- Medical Imaging
- Data Acquisition Systems
- Digital beam-forming systems for ultrasound
- Digital Multimeters, PLC's (Programming Logic Controllers)
- TD-SCDMA, WiMAX
- Digital Storage Oscilloscope
