MCP3905A-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP3905A |
| Pin Count | 24 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 2 |
| Interface | Serial |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 2.7mA |
| Resolution | 2 B |
| Input Impedance | 390kOhm |
| Meter Type | Single Phase |
| Measurement Error | 0.1% |
| Voltage - I/O Low | 0.85V |
| Voltage - I/O High | 2.4V |
| Height | 1.85mm |
| Length | 8.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP3905A-I/SS Overview
In Tube package. Package 24-SSOP (0.209, 5.30mm Width). This device can be used as a Single Phase meter. Available in Surface Mount. Temperature at -40°C~85°C is extended during operation. The unit is powered by a 4.5V~5.5V power supply. Check out MCP3905A for more similar parts. The PMIC comes equipped with low-level I/O ports that have a voltage of 0.85V. There is a voltage value of 2.4V on this device as it is designed for high-level I/Os. It includes 24 terminations. ANALOG CIRCUIT IC with PMIC technology. There is a normal voltage requirement for the part of 5V. It is important to note that this device requires a voltage of 4.5V or higher to operate. As far as the maximum voltage that will be applied to the device is concerned, it should be kept below 5.5V. There are 24 pins that are joined together. Logic gate applications are addressed by this 24 solution. In order to allow for easy installation and dismounting, it is designed as a Surface Mount device. To be specific, this is a Other Analog ICs for specialized needs. As a precaution, it is recommended that the supply current is set to 2.7mA in order to keep the PMIC working properly. The device generally reuqires 5V power supplies. A logic device such as this has been implemented with 2 channels inside it.
MCP3905A-I/SS Features
Single Phase meter.
ANALOG CIRCUIT analog IC.
2 channels.
MCP3905A-I/SS Applications
There are a lot of Microchip Technology MCP3905A-I/SS Energy Metering ICs applications.
- Real-Time Measurement of Input Power for AC/DC Supplies
- Server Backplane Systems
- Industrial Lighting Power Monitoring
- Intelligent Power Distribution Units
- PCs/servers
- Power Monitoring for Home Automation
- Power monitoring/power budgeting
- General Purpose Energy Measurement
- Base Station Power Distribution Systems
- Subsystem Power Measurement
