MCP6022T-E/ST
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6022 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Nominal Supply Current | 1mA |
| Output Current | 22mA |
| Slew Rate | 7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 74dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 500μV |
| Current - Output / Channel | 30mA |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Height Seated (Max) | 1.1mm |
| Length | 4.4mm |
| Radiation Hardening | No |
MCP6022T-E/ST Overview
The linear amplifier is packaged in a 8-TSSOP (0.173, 4.40mm Width) case. Buffer amps of this type are called General Purpose-types. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations approaches 8. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 8 pins on this chip. Op amp ic rates 250μV for input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . There should be no change in the voltage gain. During the manufacturing process, this buffer amplifier is divided into 2 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. There are 2 elements in total in this linear amplifier. A TR-shaped amplifier is used to pack the buffer amps.
MCP6022T-E/ST Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
MCP6022T-E/ST Applications
There are a lot of Microchip Technology MCP6022T-E/ST Instrumentational OP Amps applications.
- Proportional operation circuits
- Computer workstations
- Automation control systems
- Signal filtering
- Radiation thermometry transducers
- Oscilloscopes
- Micro signal measurement
- Test and measurement instruments
- Multiplication circuits
- High-frequency data acquisition systems
