MCP6023-E/ST

1 Channels 30mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 2.5V~5.5V MCP6023 8 Pins 8-TSSOP (0.173, 4.40mm Width)

Manufacturer: Microchip Technology
Nocochips NO: 536-MCP6023-E/ST
Package: 8-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 809
Description: 1 Channels 30mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 2.5V~5.5V MCP6023 8 Pins 8-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MCP6023
Pin Count	8
Output Type	Rail-to-Rail
Power Supplies	3/5V
Number of Channels	1
Operating Supply Current	1mA
Nominal Supply Current	1mA
Output Current	22mA
Slew Rate	7V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.5V~5.5V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	250μV
Bandwidth	10MHz
Unity Gain BW-Nom	10000 kHz
Voltage Gain	110dB
Average Bias Current-Max (IIB)	0.005μA
Power Supply Rejection Ratio (PSRR)	74dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	500μV
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Height	900μm
Length	3mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MCP6023-E/ST Overview

A 8-TSSOP (0.173, 4.40mm Width) case is used to package the op amp. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be 8 terminations in the next few months. In total, there are 8 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, buffer amplifier rates 250μV voltage. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. An 1mA volt supply current is needed for this linear amplifier to operate. It is recommended to keep the voltage gain at 110dB at all times. There are 1 channels on the operational amplifiers. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer.