MCP6031-E/MC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifiers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MCP6031 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Operating Supply Current | 900nA |
| Nominal Supply Current | 900nA |
| Output Current | 23mA |
| Slew Rate | 0.004V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 23mA |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 10kHz |
| Unity Gain BW-Nom | 10 kHz |
| Voltage Gain | 115dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6031-E/MC Overview
The linear amplifier is packaged in a 8-VFDFN Exposed Pad case. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 8. Linear amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 3V. This particular linear amplifier is a type of Operational Amplifiers device, to be precise. In total, the buffer amplifier consists of 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 150μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . As long as the supply current of the chip does not exceed 900nA, this op amp ic can operate. The voltage gain should stay at 115dB. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. A total of 1 elements are present in this linear amplifier.
MCP6031-E/MC Features
8 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6031-E/MC Applications
There are a lot of Microchip Technology MCP6031-E/MC Instrumentational OP Amps applications.
- ECG equipment
- Test and measurement instruments
- Biopotential
- Band-pass filter
- Signal transformation
- Large motor controllers
- Ultrasound transducers
- Video computer boards
- Information processing
- Video data acquisition
