MCP6033-E/SN
| Parameters | |
|---|---|
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 1kHz |
| Programmable Power | NO |
| Height | 1.2446mm |
| Length | 4.8768mm |
| Width | 3.9116mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6033 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 2/5V |
| Number of Channels | 1 |
| Operating Supply Current | 900nA |
| Nominal Supply Current | 900nA |
| Output Current | 23mA |
| Slew Rate | 0.004V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 23mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 10 kHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 115dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
MCP6033-E/SN Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. This is a General Purpose type op amp. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. The total number of pins on linear amplifier is 8. It is important to remember that this op amp should be operated at a voltage of 1.8V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are available on the instrumentation amplifier. The input offset voltage is 150μV. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using an 900nA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 115dB for the time being. As far as the device is concerned, buffer amplifier has 1 channels. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits.
MCP6033-E/SN Features
8 Pins
supply voltage of 1.8V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6033-E/SN Applications
There are a lot of Microchip Technology MCP6033-E/SN Instrumentational OP Amps applications.
- Communication device
- Laptop
- Industrial control system
- Proportional counter tubes
- Car stereo
- Automation control systems
- Displayers for aircraft and air transportation control systems
- Weak signal detection
- Hand-held batteries
- pH (acidity)
