MCP6033T-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6033 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Operating Supply Current | 900nA |
| Nominal Supply Current | 900nA |
| Output Current | 23mA |
| Slew Rate | 0.004V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 23mA |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 10kHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 115dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 1kHz |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1.2446mm |
| Length | 4.8768mm |
| Width | 3.9116mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6033T-E/SN Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 1.8V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 150μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 900nA . There should be no change in the voltage gain at 115dB. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. This linear amplifier pack is based on the TAPE AND REEL axis.
MCP6033T-E/SN Features
8 Pins
supply voltage of 1.8V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6033T-E/SN Applications
There are a lot of Microchip Technology MCP6033T-E/SN Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Automation control systems
- earphone
- Proportional counter tubes
- Polarized electrodes
- Subtraction operation circuits
- Inverse/same-phase proportional circuit
- Communication device
- High speed sample
- PDA
