MCP603T-I/CH
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP603 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5.5V |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 230μA |
| Output Current | 22mA |
| Slew Rate | 2.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 2.8MHz |
| Unity Gain BW-Nom | 2800 kHz |
| Voltage Gain | 115dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 700μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Length | 2.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP603T-I/CH Overview
In order to protect the op amps, a SOT-23-6 case is used. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There have been a total of 6 terminations over the past year. Linear amplifier has a total of 6 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. It has 6 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 2mV. This electronic part is recommended for mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is recommended to keep the voltage gain at 115dB at all times. A linear amplifier like this has 1 circuits on it. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The linear amplifier consists of 1 different elements in total. The operating supply voltage of instrumentation amplifier is rated 5.5V voltage. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted.
MCP603T-I/CH Features
6 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
MCP603T-I/CH Applications
There are a lot of Microchip Technology MCP603T-I/CH Instrumentational OP Amps applications.
- Ultrasound transducers
- Automation control systems
- PDA
- Measurements of Wheatstone bridge
- Precision measurement
- Polarized electrodes
- Multiplication circuits
- Gaming industry
- Subtraction operation circuits
- High/low-pass filter circuit
