MCP6041-E/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2002 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MCP6041 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5.5V |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.4V |
| Nominal Supply Current | 600nA |
| Output Current | 21mA |
| Current - Supply | 600nA |
| Slew Rate | 0.003V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.4V~6V |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 14 kHz |
| Gain Bandwidth Product | 14kHz |
| Voltage Gain | 115dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 3mV |
| Number of Amplifiers | 1 |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6041-E/MS Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. An 8-pin op amp ic is included in the package. Op amp ic rates 3mV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. 115dB should be the voltage gain. This op amp ic has 1 circuits. The op amp ic has 1 channels on it. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Use op amps only at temperatures no higher than 125°C. There are 1 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.5V. In order to ensure optimal performance, an 600nA supply is recommended for this electrical component. This electric component can work from a voltage of under 6V as far as supply voltage is concerned. Over 1.4V is a recommended supply voltage for buffer ampsOn the linear amplifier, there are 1 amplifiers that are used.
MCP6041-E/MS Features
115dB voltage gain
Output Type: Rail-to-Rail
MCP6041-E/MS Applications
There are a lot of Microchip Technology MCP6041-E/MS Instrumentational OP Amps applications.
- Video data acquisition
- Navigation
- Logarithmic operation circuits
- Industrial applications including automation
- Micro signal measurement
- Displayers for aircraft and air transportation control systems
- Differentiator circuits
- Fission chambers
- Non-polarized electrodes
- Test and measurement instruments
