banner_page

MCP6043T-I/CH

1pA 60 dB Instrumentational OP Amps 5.5V 1.4V~6V MCP6043 6 Pins SOT-23-6


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MCP6043T-I/CH
  • Package: SOT-23-6
  • Datasheet: PDF
  • Stock: 348
  • Description: 1pA 60 dB Instrumentational OP Amps 5.5V 1.4V~6V MCP6043 6 Pins SOT-23-6(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-23-6
Number of Pins 6
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2008
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - annealed
Subcategory Operational Amplifier
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.95mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MCP6043
Pin Count 6
Output Type Rail-to-Rail
Operating Supply Voltage 5.5V
Number of Elements 1
Nominal Supply Current 600nA
Output Current 21mA
Current - Supply 600nA
Slew Rate 0.003V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 60 dB
Current - Input Bias 1pA
Voltage - Supply, Single/Dual (±) 1.4V~6V
Input Offset Voltage (Vos) 3mV
Gain Bandwidth Product 14kHz
Unity Gain BW-Nom 14 kHz
Voltage Gain 115dB
Power Supply Rejection Ratio (PSRR) 70dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 7V
Current - Output / Channel 20mA
Low-Bias YES
Micropower YES
Programmable Power NO
Wideband NO
Length 2.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MCP6043T-I/CH Overview


Op amp is packaged in SOT-23-6 case. A General Purpose-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 6. In this case, there are 6 pins on the board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. Linear amplifier includes 6 pins. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . 115dB should be the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.5V. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. We recommend that you use this electronic part with an 600nA supply in order to get the best performance from it.

MCP6043T-I/CH Features


6 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail

MCP6043T-I/CH Applications


There are a lot of Microchip Technology MCP6043T-I/CH Instrumentational OP Amps applications.

  • Radar
  • Thermocouples
  • Micro signal measurement
  • Proportional counter tubes
  • E-book readers
  • Cinema or auditorium audio system
  • Instrumentation
  • Video computer boards
  • Automotive sensors
  • RF cable systems

Write a review

Note: HTML is not translated!
    Bad           Good