MCP6054T-E/SL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6054 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 30μA |
| Output Current | 26mA |
| Current - Supply | 30μA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~6V |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 385kHz |
| Unity Gain BW-Nom | 385 kHz |
| Voltage Gain | 115dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0001μA |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP6054T-E/SL Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations is approaching the 14 mark. It consists of a total of 14 pins in total. It is important to remember that this op amp should be operated at a voltage of 3V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 14 pins are present on the instrumentation amplifier. The input offset voltage is 150μV. This electronic part is best mounted with type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. 115dB should be the voltage gain. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The linear amplifier consists of 4 different elements in total. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. In order to ensure optimal performance, an 30μA supply is recommended for this electrical component.
MCP6054T-E/SL Features
14 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6054T-E/SL Applications
There are a lot of Microchip Technology MCP6054T-E/SL Instrumentational OP Amps applications.
- Multimedia playback equipment
- Measurements of Wheatstone bridge
- Video computer boards
- pH (acidity)
- Multiplication circuits
- Integrator circuits
- Automatic control
- Cinema or auditorium audio system
- Information processing
- Broadcasting
