MCP6061T-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6061 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Nominal Supply Current | 60μA |
| Output Current | 27mA |
| Current - Supply | 60μA |
| Slew Rate | 0.25V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~6V |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 730 kHz |
| Unity Gain BW-Nom | 730 kHz |
| Voltage Gain | 115dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 7V |
| Height | 1.2954mm |
| Length | 3.0988mm |
| Width | 1.8034mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6061T-E/OT Overview
In order to protect the op amps, a SC-74A, SOT-753 case is used. An op amp of this type is a General Purpose-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 5 mark. In total, there are 5 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 3V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 5 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 150μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureMaintain 115dB as the voltage gain. 1 channels are available on the instrumentation amplifier. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. There is a recommendation that this electrical part be used with a supply with 60μA current rating.
MCP6061T-E/OT Features
5 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6061T-E/OT Applications
There are a lot of Microchip Technology MCP6061T-E/OT Instrumentational OP Amps applications.
- Commercial audio systems
- ECG equipment
- Television broadcasting equipment
- Cinema or auditorium audio system
- Video computer boards
- Vehicle electronics
- Strain gauges
- High/low-pass filter circuit
- Car stereo
- Signal filtering
