Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
Published |
2000 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCP6064 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Power Supplies |
2/5V |
Number of Channels |
4 |
Operating Supply Current |
60μA |
Nominal Supply Current |
60μA |
Output Current |
27mA |
Slew Rate |
0.25V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
72 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
1.8V~6V |
Output Current per Channel |
27mA |
Input Offset Voltage (Vos) |
150μV |
Bandwidth |
730 kHz |
Unity Gain BW-Nom |
730 kHz |
Voltage Gain |
115dB |
Average Bias Current-Max (IIB) |
0.005μA |
Power Supply Rejection Ratio (PSRR) |
70dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
7V |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.0001μA |
Programmable Power |
NO |
Height |
1mm |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MCP6064-E/ST Overview
Packaged in a 14-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 14h termination of the year. There are a total of 14 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. There are 14 pins on this chip. The input offset voltage is 150μV. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. Using a supply current of 60μA , this buffer op amp will be able to operate. 115dB should remain the voltage gain. On the buffer amps, there are 4 channels that can be used. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals.
MCP6064-E/ST Features
14 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6064-E/ST Applications
There are a lot of Microchip Technology MCP6064-E/ST Instrumentational OP Amps applications.
- Computer workstations
- Strain gauges
- Portable electronic products powered by batteries
- Band-pass filter
- MP3
- Proportional operation circuits
- Division circuits
- Gaming industry
- Laptop
- High-frequency data acquisition systems