MCP6064T-E/SL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6064 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 60μA |
| Output Current | 27mA |
| Current - Supply | 60μA |
| Slew Rate | 0.25V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~6V |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 730kHz |
| Unity Gain BW-Nom | 730 kHz |
| Voltage Gain | 115dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0001μA |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6064T-E/SL Overview
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 14. Buffer amplifier has a total of 14 pins on it. Please take in mind that this instrumentation amplifier should be run at 3V. It should be noted that this op amp is a type of Operational Amplifier device. An 14-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 150μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . You should keep the voltage gain at 115dB for the time being. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. There is a rating of 4 for the operating supply voltage of the buffer op amp. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. There is a recommendation that this electrical part be used with a supply with 60μA current rating.
MCP6064T-E/SL Features
14 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6064T-E/SL Applications
There are a lot of Microchip Technology MCP6064T-E/SL Instrumentational OP Amps applications.
- Proportional operation circuits
- Radiation thermometry transducers
- Portable docking station
- earphone
- Gaming industry
- Signal operation
- Fission chambers
- Hand-held batteries
- Band-pass filter
- Band-stop filter
