MCP606T-I/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP606 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5.5V |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Operating Supply Current | 18.7μA |
| Nominal Supply Current | 25μA |
| Output Current | 17mA |
| Slew Rate | 0.08V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V |
| Output Current per Channel | 17mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 155 kHz |
| Unity Gain BW-Nom | 155 kHz |
| Voltage Gain | 121dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Length | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP606T-I/ST Overview
It is packaged in an 8-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. A General Purpose-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 8-pin op amp ic is included in the package. There is an input offset voltage of 250μV for this buffer op amp. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. Operational amplifier can operate supply current at 18.7μA. The voltage gain should stay at 121dB. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. The operating supply voltage of instrumentation amplifier is rated 5.5V voltage. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted.
MCP606T-I/ST Features
8 Pins
supply voltage of 5V
121dB voltage gain
Output Type: Rail-to-Rail
MCP606T-I/ST Applications
There are a lot of Microchip Technology MCP606T-I/ST Instrumentational OP Amps applications.
- PDA
- Active probe
- High/low-pass filter circuit
- Home audio systems
- Addition operation circuits
- Multimedia playback equipment
- Portable media players
- Power control
- Band-pass filter
- Proportional operation circuits
