MCP6071T-E/MNY
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6071 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 2/5V |
| Number of Channels | 1 |
| Nominal Supply Current | 110μA |
| Output Current | 28mA |
| Current - Supply | 110μA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~6V |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 1.2MHz |
| Unity Gain BW-Nom | 1200 kHz |
| Voltage Gain | 115dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Height | 750μm |
| Length | 2mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6071T-E/MNY Overview
The linear amplifier is packaged in a 8-WFDFN Exposed Pad case. General Purpose-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. Please take in mind that op amp should be run at 3V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 150μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. 115dB should remain the voltage gain. There are a total of 1 channels available on the op amps. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. As a recommendation, this electronic component should be used with a power supply that can deliver 110μA.
MCP6071T-E/MNY Features
8 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6071T-E/MNY Applications
There are a lot of Microchip Technology MCP6071T-E/MNY Instrumentational OP Amps applications.
- Band-stop filter
- Voltage regulation circuit
- Professional videography
- Comparator
- ECG equipment
- MP3
- Communication device
- single/dual op amp sum and difference circuits
- Biopotential
- Communication
