MCP6141-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | MCP6141 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 600nA |
| Output Current | 21mA |
| Current - Supply | 600nA |
| Slew Rate | 0.003V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.4V~6V |
| Input Offset Voltage (Vos) | 3mV |
| Gain Bandwidth Product | 100kHz |
| Unity Gain BW-Nom | 100 kHz |
| Voltage Gain | 115dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Supply Voltage Limit-Max | 7V |
| Current - Output / Channel | 20mA |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 5.334mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MCP6141-E/P Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. Buffer amps of this type are called General Purpose-types. Upon delivery, op amp ic is packaged in a Tube case. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. An 8-pin op amp ic is included in the package. Op amp rates 3mV as input offset voltage. This electronic part is recommended for mounting type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The voltage gain should stay at 115dB. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. A voltage rating of 1 is indicated for the op amp's operating supply voltage. As a result, it is recommended that a power supply of 600nA be used with this electronic part.
MCP6141-E/P Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6141-E/P Applications
There are a lot of Microchip Technology MCP6141-E/P Instrumentational OP Amps applications.
- Multiplication circuits
- Signal amplification
- Communication device
- Differentiator circuits
- Band-stop filter
- Multimedia playback equipment
- Precision measurement
- PDA
- Logarithmic operation circuits
- Industrial applications including automation
