MCP6141T-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6141 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 600nA |
| Nominal Supply Current | 600nA |
| Output Current | 21mA |
| Slew Rate | 0.003V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.4V~6V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 100 kHz |
| Unity Gain BW-Nom | 100 kHz |
| Voltage Gain | 115dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6141T-E/OT Overview
There is a SC-74A, SOT-753 case in which the instrumentation amplifier is packaged. A General Purpose-type buffer amplifier is shown here. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There have been a total of 5 terminations over the past year. A total of 5 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. An 5-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. The mounting type that is recommended for this electrical part is Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . You can run this op amp ic on 600nA . It is recommended to keep the voltage gain at 115dB at all times. There are a total of 1 channels available on the op amps. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps.
MCP6141T-E/OT Features
5 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6141T-E/OT Applications
There are a lot of Microchip Technology MCP6141T-E/OT Instrumentational OP Amps applications.
- RF cable systems
- Information processing
- Power control
- Industrial applications including automation
- Image computer boards
- Medical instruments
- Test and measurement instruments
- Cinema or auditorium audio system
- Division circuits
- pH (acidity)
