MCP616T-I/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP616 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 2.5/5V |
| Nominal Supply Current | 19μA |
| Output Current | 17mA |
| Current - Supply | 19μA |
| Slew Rate | 0.08V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 2.3V~5.5V |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 190kHz |
| Unity Gain BW-Nom | 190 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Current - Output / Channel | 17mA |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.005μA |
| Wideband | NO |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP616T-I/SN Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. We are approaching the 8h termination of the year. A total of 8 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 150μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The voltage gain should stay at 120dB. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. This linear amplifier pack is based on the TAPE AND REEL axis. This electronic part is recommended to be used with an 19μA supply for best performance.
MCP616T-I/SN Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
MCP616T-I/SN Applications
There are a lot of Microchip Technology MCP616T-I/SN Instrumentational OP Amps applications.
- Addition operation circuits
- Video conversion and routing
- Television broadcasting equipment
- Test equipment
- Navigation
- Scintillation detectors
- Cinema or auditorium audio system
- High speed sample
- Gaming industry
- Signal filtering
