MCP617T-I/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP617 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Nominal Supply Current | 19μA |
| Output Current | 17mA |
| Current - Supply | 19μA |
| Slew Rate | 0.08V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 2.3V~5.5V |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 190 kHz |
| Unity Gain BW-Nom | 190 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Current - Output / Channel | 17mA |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.005μA |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP617T-I/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp ic of the General Purpose type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 8 terminations. Buffer amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 8-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 150μV. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . There should be no change in the voltage gain. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The linear amplifier is packaged by using a TAPE AND REEL axis. As a recommendation, this electronic component should be used with a power supply that can deliver 19μA.
MCP617T-I/SN Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
MCP617T-I/SN Applications
There are a lot of Microchip Technology MCP617T-I/SN Instrumentational OP Amps applications.
- Radiation thermometry transducers
- Micro signal measurement
- Power transmission
- Information processing
- Displayers for aircraft and air transportation control systems
- Addition operation circuits
- Test and measurement instruments
- Automatic control
- Wireless base stations
- Video amplifiers
