MCP622-E/SN

2 Channels 70mA per Channel 5pA 65 dB Instrumentational OP Amps 0.005μA 2.5V~5.5V MCP622 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Microchip Technology
Nocochips NO: 536-MCP622-E/SN
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 369
Description: 2 Channels 70mA per Channel 5pA 65 dB Instrumentational OP Amps 0.005μA 2.5V~5.5V MCP622 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
Published	2000
Series	mCal Technology
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn) - annealed
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.5V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MCP622
Pin Count	8
Output Type	Rail-to-Rail
Power Supplies	3/5V
Number of Channels	2
Operating Supply Current	2.5mA
Nominal Supply Current	2.5mA
Output Current	70mA
Slew Rate	10V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	5pA
Voltage - Supply, Single/Dual (±)	2.5V~5.5V
Output Current per Channel	70mA
Input Offset Voltage (Vos)	200μV
Bandwidth	20MHz
Unity Gain BW-Nom	20000 kHz
Voltage Gain	126dB
Average Bias Current-Max (IIB)	0.005μA
Power Supply Rejection Ratio (PSRR)	61dB
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	6.5V
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Height	1.25mm
Length	4.9mm
Width	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MCP622-E/SN Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins on it. The linear amplifier should be run at 2.5V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The buffer op amp includes 8 pins. Op amp ic rates 200μV for input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. An 2.5mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 126dB. 2 channels are available on the instrumentation amplifier. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. As the name implies, mCal Technology refers to the series of the buffer op amp.