MCP6241-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MCP6241 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 2/5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 50μA |
| Output Current | 23mA |
| Min Input Voltage | 1.8V |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Max Input Voltage | 5.5V |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 650 kHz |
| Gain Bandwidth Product | 550kHz |
| Unity Gain BW-Nom | 550 kHz |
| Voltage Gain | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 1kHz |
| Programmable Power | NO |
| Power | NO |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6241-E/P Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. An op amp ic of the General Purpose type. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 8. It consists of a total of 8 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. An 8-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 5mV. For this electrical component, Through Hole is the recommended mounting type. With regard to operating temperature, this op amp functions well at -40°C~125°C. Keeping the voltage gain at 110dB is the best course of action. On this instrumentation amplifier, there are 1 circuits that are connected together. Instrumentation amplifier has 1 channels on it. On the output type, there are Rail-to-Rail different types of op amps.
MCP6241-E/P Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
MCP6241-E/P Applications
There are a lot of Microchip Technology MCP6241-E/P Instrumentational OP Amps applications.
- Navigation
- Test equipment
- Multiplication circuits
- Power control
- Power generator
- Strain gauges
- Semiconductor detectors
- Information processing
- Medical instruments
- Gaming industry
