MCP6241T-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6241 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Nominal Supply Current | 50μA |
| Output Current | 23mA |
| Current - Supply | 50μA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 550 kHz |
| Unity Gain BW-Nom | 550 kHz |
| Voltage Gain | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Current - Output / Channel | 23mA |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6241T-E/OT Overview
Packaged in a SC-74A, SOT-753 case, the buffer op amp is ready to use. This is a General Purpose type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 5. The total number of pins on linear amplifier is 5. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 5-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 5mV. This electronic part is recommended for mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureThe voltage gain should stay at 110dB. There are 1 channels on the operational amplifiers. On the output type, there are Rail-to-Rail different types of op amps. This linear amplifier pack is based on the TAPE AND REEL axis. A supply of 50μA or higher is recommended for use with this electronic part.
MCP6241T-E/OT Features
5 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
MCP6241T-E/OT Applications
There are a lot of Microchip Technology MCP6241T-E/OT Instrumentational OP Amps applications.
- Video amplifiers
- Power control
- Video data acquisition
- Test and measurement instruments
- Fast A/D and D/A converters
- Scintillation detectors
- Non-polarized electrodes
- Division circuits
- Communication device
- Car stereo
