MCP624T-E/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | mCal Technology |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP624 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 2.5mA |
| Output Current | 70mA |
| Current - Supply | 2.5mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 20MHz |
| Unity Gain BW-Nom | 20000 kHz |
| Voltage Gain | 126dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.5V |
| Current - Output / Channel | 70mA |
| Low-Bias | YES |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP624T-E/ST Overview
The linear amplifier is packaged in a 14-TSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be at least 14 terminations this year. Buffer amplifier has a total of 14 pins. As a reminder, this buffer op amp should be powered by 2.5V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The buffer op amp includes 14 pins. The input offset voltage is 200μV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . It is recommended to keep the voltage gain at 126dB at all times. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. There are a total of 4 elements in this linear amplifier. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. As a recommendation, this electronic component should be used with a power supply that can deliver 2.5mA. Instrumentation amplifiers are numbered by their mCal Technology series.
MCP624T-E/ST Features
14 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
MCP624T-E/ST Applications
There are a lot of Microchip Technology MCP624T-E/ST Instrumentational OP Amps applications.
- MP3
- Broadcasting
- Professional videography
- Oscilloscopes
- Non-polarized electrodes
- Home audio systems
- Tablets
- pH (acidity)
- Differentiator circuits
- Radiation thermometry transducers
