MCP625T-E/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Supplier Device Package | 10-DFN (3x3) |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | mCal Technology |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MCP625 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Nominal Supply Current | 2.5mA |
| Output Current | 70mA |
| Current - Supply | 2.5mA |
| Slew Rate | 10V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 20MHz |
| Voltage Gain | 126dB |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Voltage - Input Offset | 200μV |
| Current - Output / Channel | 70mA |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP625T-E/MF Overview
Packaged in a 10-VFDFN Exposed Pad case, the buffer op amp is ready to use. This is a General Purpose type op amp. A Tape & Reel (TR) case is used to deliver the buffer op amp. The buffer op amp includes 10 pins. Op amp ic rates 200μV for input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . There should be no change in the voltage gain at 126dB. During the manufacturing process, this buffer amplifier is divided into 2 circuits. There are 2 channels on the operational amplifiers. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. Instrumentation amplifier shouldn't be used above 125°C . The total number of elements in this buffer amplifier is 2. There is a recommendation that this electrical part be used with a supply with 2.5mA current rating. With regard tp supply voltage, op amp is used under 5.5V. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.5V. The mCal Technology indicates the series number of the op amp.
MCP625T-E/MF Features
126dB voltage gain
Output Type: Rail-to-Rail
MCP625T-E/MF Applications
There are a lot of Microchip Technology MCP625T-E/MF Instrumentational OP Amps applications.
- Test equipment
- Proportional counter tubes
- High gain DC amplifier
- Radiation thermometry transducers
- High speed sample
- Ultrasound transducers
- RF cable systems
- Tablets
- Multimedia playback equipment
- Power generator
