MCP6271RT-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6271 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Nominal Supply Current | 170μA |
| Output Current | 25mA |
| Current - Supply | 170μA |
| Slew Rate | 0.9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2V~6V |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 2MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 110dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Current - Output / Channel | 25mA |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6271RT-E/OT Overview
Packaging for the buffer amplifier is in the form of a SC-74A, SOT-753 case. An op amp ic of the General Purpose type. Instrumentation amplifier is delivered in a Cut Tape (CT) case. It is estimated that there will be 5 terminations in the next few months. There are a total of 5 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 5-pin op amp ic is included in the package. As far as the input offset voltage is concerned, linear amplifier rates at 3mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . 110dB should be the voltage gain. There are a total of 1 channels available on the op amps. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. As a recommendation, this electronic component should be used with a power supply that can deliver 170μA.
MCP6271RT-E/OT Features
5 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
MCP6271RT-E/OT Applications
There are a lot of Microchip Technology MCP6271RT-E/OT Instrumentational OP Amps applications.
- ECG equipment
- Integrator circuits
- Mobile phone
- Micro signal measurement
- Wireless base stations
- Portable docking station
- Test and measurement instruments
- Logarithmic operation circuits
- High speed sample
- E-book readers
