MCP6271T-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6271 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 2.5/5V |
| Nominal Supply Current | 170μA |
| Output Current | 25mA |
| Current - Supply | 170μA |
| Slew Rate | 0.9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2V~6V |
| Input Offset Voltage (Vos) | 3mV |
| Gain Bandwidth Product | 2MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Current - Output / Channel | 25mA |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6271T-E/SN Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Op amps are General Purpose types of amplifier on the chip. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There have been a total of 8 terminations over the past year. The total number of pins on linear amplifier is 8. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 3mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . 110dB should be the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. A voltage rating of 1 is indicated for the op amp's operating supply voltage. As a result of this, the buffer amplifier is packed in TAPE AND REEL. For optimal performance, this electrical part should be connected to a supply with a current of 170μA.
MCP6271T-E/SN Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
MCP6271T-E/SN Applications
There are a lot of Microchip Technology MCP6271T-E/SN Instrumentational OP Amps applications.
- Integrator circuits
- Test and measurement instruments
- Communication
- Band-stop filter
- Blood pressure sensors
- Broadcasting
- Proportional counter tubes
- High-frequency data acquisition systems
- ECG equipment
- Information processing
