MCP6272-E/P
| Parameters | |
|---|---|
| Nominal Supply Current | 170μA |
| Output Current | 25mA |
| Min Input Voltage | 2V |
| Slew Rate | 0.9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Max Input Voltage | 6V |
| Voltage - Supply, Single/Dual (±) | 2V~6V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 2MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 1kHz |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MCP6272 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 170μA |
MCP6272-E/P Overview
Op amp is packaged in 8-DIP (0.300, 7.62mm) case. General Purpose-type instrumentation amplifiers are used in this application. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, op amp rates 3mV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~125°C. Using an 170μA supply current, this operational amplifier ics can be operated. Voltage gain should remain at 110dB. Op amp ic has 2 channels. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages.
MCP6272-E/P Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
MCP6272-E/P Applications
There are a lot of Microchip Technology MCP6272-E/P Instrumentational OP Amps applications.
- Division circuits
- High speed sample
- Medical imaging
- Test equipment
- Television
- Signal filtering
- Displayers for aircraft and air transportation control systems
- Home audio systems
- Vehicle electronics
- Comparator
