MCP6273-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 8-PDIP |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2008 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MCP6273 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 170μA |
| Nominal Supply Current | 170μA |
| Output Current | 25mA |
| Current - Supply | 170μA |
| Slew Rate | 0.9V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2V~6V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 2MHz |
| Gain Bandwidth Product | 2MHz |
| Voltage Gain | 110dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 3mV |
| Current - Output / Channel | 25mA |
| Number of Amplifiers | 1 |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6273-E/P Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. In total, the buffer amplifier consists of 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. This electrical part should be mounted using type Through Hole. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureUsing a supply current of 170μA , this buffer op amp will be able to operate. 110dB should remain the voltage gain. This op amp contains 1 circuits. Instrumentation amplifier has 1 channels on it. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. To operate this buffer amplifier, the temperature must not be lower than -40°C. At temperatures greater than 125°C, Instrumentation amplifier should not be used. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. This electronic part is recommended to be used with an 170μA supply for best performance. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 5.5V, and this is an excellent feature. The linear amplifier's supply voltage should be higher than 2V. The buffer amplifier consists of 1 amplifiers.
MCP6273-E/P Features
110dB voltage gain
Output Type: Rail-to-Rail
MCP6273-E/P Applications
There are a lot of Microchip Technology MCP6273-E/P Instrumentational OP Amps applications.
- Computer workstations
- Laptop
- Car stereo
- Biopotential
- Signal operation
- Automation control systems
- Voltage regulation circuit
- Switching amplifier
- High-frequency data acquisition systems
- Signal filtering
