MCP6285-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MCP6285 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Nominal Supply Current | 450μA |
| Output Current | 25mA |
| Quiescent Current | 450μA |
| Slew Rate | 2.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.2V~6V |
| Input Offset Voltage (Vos) | 3mV |
| Gain Bandwidth Product | 5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Current - Output / Channel | 25mA |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 5.334mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP6285-E/P Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. This is a General Purpose type op amp. In the case of Tube cases, linear amplifier will be delivered. We are approaching the 8h termination of the year. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 8-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 3mV voltage. For this electronic part, it is recommended that you mount it with type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. There should be no change in the voltage gain. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. This linear amplifier has a total of 2 elements. Buffer amplifier has a quiescent current of 450μA.
MCP6285-E/P Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
MCP6285-E/P Applications
There are a lot of Microchip Technology MCP6285-E/P Instrumentational OP Amps applications.
- Communication device
- Measurements of Wheatstone bridge
- Polarized electrodes
- Video data acquisition
- Automotive sensors
- Video conversion and routing
- Industrial applications including automation
- Medical imaging
- Industrial control system
- Navigation
