MCP6294-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | MCP6294 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 2.5/5V |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Nominal Supply Current | 1mA |
| Output Current | 25mA |
| Min Input Voltage | 2.4V |
| Slew Rate | 7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Max Input Voltage | 6V |
| Voltage - Supply, Single/Dual (±) | 2.4V~6V |
| Input Offset Voltage (Vos) | 3mV |
| Gain Bandwidth Product | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Max Frequency | 10kHz |
| Height | 4.953mm |
| Length | 19.69mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6294-E/P Overview
It is packaged in an 14-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 14. Buffer amplifier has a total of 14 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. There are 14 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Maintain 110dB as the voltage gain. This op amp contains 4 circuits. Op amp ic has 4 channels. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits.
MCP6294-E/P Features
14 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
MCP6294-E/P Applications
There are a lot of Microchip Technology MCP6294-E/P Instrumentational OP Amps applications.
- Information processing
- Subtraction operation circuits
- Video computer boards
- Industrial control system
- Weighing systems
- Inverse/same-phase proportional circuit
- Laptop
- Gaming industry
- High input resistance broadband
- Non-polarized electrodes
