MCP6401T-H/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6401 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 45μA |
| Output Current | 15mA |
| Current - Supply | 45μA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~6V |
| Input Offset Voltage (Vos) | 4.5mV |
| Gain Bandwidth Product | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 110dB |
| Power Supply Rejection Ratio (PSRR) | 63dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6401T-H/OT Overview
In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. Buffer amps of this type are called General Purpose-types. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 5. The total number of pins on linear amplifier is 5. The linear amplifier should be run at 1.8V at all times, so please keep that in mind when using it. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 5 pins on it. Regarding input offset voltage, op amp rates 4.5mV. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~150°C . There should be no change in the voltage gain at 110dB. On the output type, there are Rail-to-Rail different types of op amps. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. As a result, it is recommended that a power supply of 45μA be used with this electronic part.
MCP6401T-H/OT Features
5 Pins
supply voltage of 1.8V
110dB voltage gain
Output Type: Rail-to-Rail
MCP6401T-H/OT Applications
There are a lot of Microchip Technology MCP6401T-H/OT Instrumentational OP Amps applications.
- Medical instruments
- Switching amplifier
- Instrumentation
- Wireless base stations
- High-frequency data acquisition systems
- Multimedia playback equipment
- Oscilloscopes
- Differentiator circuits
- Commercial audio systems
- Comparator
