banner_page

MCP6402-H/SN

1pA 56 dB Instrumentational OP Amps 0.0001μA 1.8V~6V MCP6402 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MCP6402-H/SN
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 363
  • Description: 1pA 56 dB Instrumentational OP Amps 0.0001μA 1.8V~6V MCP6402 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Nominal Supply Current 45μA
Output Current 15mA
Current - Supply 45μA
Slew Rate 0.5V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 56 dB
Current - Input Bias 1pA
Voltage - Supply, Single/Dual (±) 1.8V~6V
Input Offset Voltage (Vos) 4.5mV
Gain Bandwidth Product 1MHz
Unity Gain BW-Nom 1000 kHz
Voltage Gain 110dB
Average Bias Current-Max (IIB) 0.0001μA
Power Supply Rejection Ratio (PSRR) 63dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 7V
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.0001μA
Height Seated (Max) 1.75mm
Length 4.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~150°C
Packaging Tube
Published 2009
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - annealed
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 1.8V
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MCP6402
Pin Count 8
Output Type Rail-to-Rail
Number of Elements 2

MCP6402-H/SN Overview


Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. In total, there are 8 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 1.8V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 8 pins on this chip. In terms of input offset voltage, operational amplifier rates 4.5mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~150°C . Op amp is a member of the 110dB's 110dB family. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The total number of elements in this buffer amplifier is 2. In order to ensure optimal performance, an 45μA supply is recommended for this electrical component.

MCP6402-H/SN Features


8 Pins
supply voltage of 1.8V
110dB voltage gain
Output Type: Rail-to-Rail

MCP6402-H/SN Applications


There are a lot of Microchip Technology MCP6402-H/SN Instrumentational OP Amps applications.

  • Industrial control system
  • Proportional counter tubes
  • Signal operation
  • High speed sample
  • Non-polarized electrodes
  • RF cable systems
  • MP3
  • Mobile phone
  • Logarithmic operation circuits
  • Integrator circuits

Write a review

Note: HTML is not translated!
    Bad           Good