MCP6421T-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Manufacturer Package Identifier | C04-091D [OT] |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6421 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 4.4μA |
| Nominal Supply Current | 4.4μA |
| Output Current | 22mA |
| Slew Rate | 0.05V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 22mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 90 kHz |
| Unity Gain BW-Nom | 90 kHz |
| Voltage Gain | 115dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Input Voltage Noise Density | 95nV/sqrt Hz |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6421T-E/OT Overview
Packaged in a SC-74A, SOT-753 case, the buffer op amp is ready to use. General Purpose-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations is approaching the 5 mark. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. There are 5 pins on this chip. The input offset voltage is 1mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. As long as the supply current of the chip does not exceed 4.4μA, this op amp ic can operate. Maintain 115dB as the voltage gain. The op amp ic has 1 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps.
MCP6421T-E/OT Features
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6421T-E/OT Applications
There are a lot of Microchip Technology MCP6421T-E/OT Instrumentational OP Amps applications.
- Hand-held batteries
- Image computer boards
- Cinema or auditorium audio system
- Computer workstations
- Medical instruments
- Biopotential
- Gaming industry
- Automotive sensors
- Broadcasting
- RF cable systems
