MCP6424-E/SL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6424 |
| Output Type | Rail-to-Rail |
| Number of Channels | 4 |
| Operating Supply Current | 4.4μA |
| Nominal Supply Current | 4.4mA |
| Slew Rate | 0.05V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 22mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 90 kHz |
| Unity Gain BW-Nom | 90 kHz |
| Voltage Gain | 115dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Supply Voltage Limit-Max | 6.5V |
| Height | 1.5mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MCP6424-E/SL Overview
Op amp is packaged in 14-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. There is a Tube case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 14 terminations. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 14 pins are located on the operational amplifiers. Op amp rates 1mV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 4.4μA . Maintain 115dB as the voltage gain. Buffer op amp is equipped with 4 channels on the device. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages.
MCP6424-E/SL Features
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6424-E/SL Applications
There are a lot of Microchip Technology MCP6424-E/SL Instrumentational OP Amps applications.
- Portable electronic products powered by batteries
- Fission chambers
- Industrial control system
- Radar
- earphone
- Cinema or auditorium audio system
- High input resistance broadband
- High gain DC amplifier
- Test and measurement instruments
- High/low-pass filter circuit
